WolfVision VZ-9plu - Handbuch (Seite 20)

One Push White Balance:
Press the LIGHT key (#25) for 2 seconds to perform one push white balance.
Activating the on-screen menu:
Press the MENU key (#31) (EXTERN key) on the camera head for 2 seconds to activate the on-
screen menu. Use the ZOOM wheel (#27) and the FOCUS keys (#28) to navigate. For the help
function, press the AF key (#29).
Resetting the selected menu item:
For resetting only the selected item press the AF key (#29) for 2 seconds.
Recalling Preset 1:
Press the PRESET 1 key (#30) (FREEZE key) on the camera head for 2 seconds.
19
Storing presets:
Press the desired PRESET key (#34) for 2 seconds.
Recalling presets:
Press the desired PRESET key (#34) quickly.
Storing images:
Press the desired MEMORY key (#43) for 2 seconds.
Recalling images:
Press the desired MEMORY key (#43) quickly.
Filling the memory quickly:
Press the VIEW key (#39) (ALL key) for more than 4 seconds then follow the instructions of the on-
screen menu (Press MEMORY 1 (#43) for auto snapshot or MEMORY 3 (#43) to erase the memory).
Activating the on-screen menu:
Press the MENU key (#46) (EXTERN key) for 1 second to activate the on-screen menu. Use the
Number keys (#42) to navigate. For the help function, press the HELP key (#43).
Switching the output mode:
Higher mode: Simultaneously press both FOCUS keys (#28) on the camera head and the
Number 2 key (arrow-up) (#43) on the remote control.
Lower mode: Simultaneously press both FOCUS keys (#28) on the camera head and the
Number 8 key (arrow-down) (#43) on the remote control.
Resetting the output mode to the default of "auto resolution":
Simultaneously press both FOCUS-keys (#28) on the camera head and the Number 5 key (#43) on
the remote control.
Resetting the Visualizer's menu:
For resetting the entire menu simultaneously press both FOCUS keys (#28) on the camera head and
the Number 4 key (back arrow) (#43) on the remote control.
For resetting only the selected item press the Number 5 key (#43) on the remote control for 2
seconds.
Change IR code:
Change the IR code in the
"Misc. Settings" (code A is default).
imultaneously PRESET 1, PRESET 2 and ZOOM TELE
ress PRESET 1, PRESET 2 and ZOOM WIDE
on-screen menu Change the IR code
on the remote control too by pressing s (#34)
(#32) to switch from code A to B, C, D ... A ...in the order given. For resetting the remote control to
code A simultaneously p
(#34) (#32) (on the remote
control).
IR-Remote Control
Base and Camera head
CODES - Short Keys