WolfVision PSM-10 User Manual - Handbuch (Seite 10)

8
PSM-10 V1.02e Extra Menu
Baudrate 9600 ( 115200,
230400, 460800, 921600)
Framerate 30fps (12, 15, 20, 25)
Max. Gain 0x3ff (0x096 to 0x3ff)
Image Rotation 0 (180)
Exit
19200, 38400, 57600,
EXTRA MENU
Press the MENU-key (#19) for 4 seconds until the extra menu appears on the screen.
Please note that the functions of the on-screen, as shown below, may change after a firmware update.
(layout shows firmware v1.03a)
Note: When the frame rate is changed, the camera should be disconnected from the power.
If a setting is marked with “!”, the setting is changed with the RS-232 control software. This is only a
temporary change, until the camera is disconnected from the power. To change a setting permanently,
change the setting in the on-screen menu.
TECHNICAL DATA
Specifications and availability subject to change!
Image sensor 1-CCD 1/3” Progressive Scan
Active pixels 1024 (H) x 768 (V)
Pictures per second 30fps (output is frame rate converted to 60Hz or 75Hz)
Horizontal resolution 640TV-Lines (with perfect edge focus)
Lens / Zoom 12x optical zoom, f=5.8 to 69.6mm, F=2.8 to 3.0
Digital zoom 2x (12x optical zoom + 2x digital zoom = 24x zoom)
Focus Continuous AF, One-Push AF, Manual Focus
Lens structure 10 groups, 13 pieces (2 spherical)
Min. Optical distance (MOD) Tele: 0.5m, Wide: 50mm (shorter distancees with supplementary lens)
XGA-output RGB HD/VD, R/G/B: 0.7Vpp into 75 Ohm,
HD/VD: 3.2Vpp into 2.2kOhm, Vertical frequency: 60Hz or 75Hz
Min. illumination 5 lux typ.
Iris / Shutter / Gain Auto Iris, Manual Iris / Exposer / Gain
White-Balance Continuous Auto Tracking, One-Push, Manual
IR-remote control yes (included)
IR-receiver internal, external (included)
Cable remote controlling yes
RS-232 for controlling and image transfering (up to 921600baud/s)
Operation temperature 0°C to +40°C
Power requirements 12V DC (+/- 10%), 0.5A typ
Dimensions 124mm (4.88”) x 65.3mm (2.57”) x 74mm (2.91”)
Weight 530g
OPTIONAL ACCESSORY
For image transfer, a fast RS-232 I/O PCI-extension card for PC is available (up to 921600 baud/s).
Order code: 4715 RS-232 interface adapter High Speed
For external cable remote controlling, the required 19pin connector is optional available.
Order code: 4734 Connector for external control and power supply (19 pin.)
To mount the camera into suspended ceilings, a Tile Bridge is optional available.
Order Code: 4737 Ceiling Tile Bridge
More information can be found on our homepage: http://www.wolfvision.com/wolf/techinfo.html