LumaSense Technologies IGA 315-K USB - Handbuch (Seite 20)

0
5.4. Changing rechargeable batteries / external recharging
To charge the rechargeable batteries the ribbed screw of the battery compartment must be
loosened and the compartment cover must be removed.
Now you can remove the rechargeable batteries. The batteries must inserted in the battery
charger correctly as shown in the battery chargers manual.
The recharged batteries have to be inserted as shown on the identification plate or the dra-
wing find below.
After closing the battery compartment the ribbed screw must be tightend firmly.
Pict. 3: Correct insertion of rechargeable batteries.
These drawing shows the infrared thermometer from the top side!
The identification plate is on the bottom side!
The recharged batteries must necessarily be filed with the correct polarity.
The recharged batteries must inserted like shown in in pict. 3!
Finally, the battery cover is closed again and tightened the thumbscrew.
5.5. Choice of a measuring row or a measuring point
By pressing the Select key in measuring mode it is possible to switch between the display-
ed storage points. The switching order is measuring row – measuring point. By pressing
+
or
-
the row / point can be selected. The Select key switches to the next free storage
place in the chosen row.
5.6. Rewriting of one or some measuring points
By pressing of the Select key followed by
+
or
-
the row will be selected. The point to
be rewritten will be selected by Select followed by
-
.
The number of the measuring point will flicker in display.
A measuring value can be taken as described above.
The instrument will suggest the following storage point in row.
To resume at the next free storage point and finish rewriting please press Select .
1.2 V
1.2 V; 2100 mA; NiMH
Rechargable batteries
1.2 V 1.2 V
1.2 V 1.2 V 1.2 V
IMPAC Handpyrometer IGA315-K USB