LumaSense Technologies IGA 315-K USB - Handbuch (Seite 23)

3
6. Configuration
6.1. Selection of values
The selection of values can be done by pressing the
+
or
-
key. The displayed value will
be enlarged or reduced by one step.
If one of the two keys is pressed longer than two seconds a quick-count mode wil be setted
to allow the change of values more quickly.
By pressing the
Select
key the value will be stored in the correct limits.
6.2. Parameters
The configuration menu is displayed from measuring mode by pressing
Conf.
and
Select
simultaneously.
In this menu the Select key switches to the next menu point. To confirm a displayed value
the
Select
key has to be pressed.
Konfiguration options:
1. Emissivity
The emissivity can be choosen between 0.1 and 0.99.
. Minimum temperature
The minimum temperature can be set.
3. Energy saving mode
The time until energy saving mode is reached
4. Automatic shutdown
The time until the instrument swiches off automatically
5. Temperaturunit
Toggle between deg. Celsius and deg. Fahrenheit
6. Measuring mode
To toggle between Continous measuring, peak picker mode and average
mode.
7. Date and time
To maintain date and time while saving data to storage it is possible to set it
here to your requirements.
6.3. Emissivity
Display:
The Emissivity can be chosen by pressing
+
or
-
between 0.1 und 0.99.
IMPAC Handpyrometer IGA315-K USB