LumaSense Technologies IGA 315-K USB - Handbuch (Seite 24)

4
6.4. Minimum temperature
Display :
The minimum temperature can be chosen by pressing
+
and
-
between
600 °C (1112 °F) and 1600 °C (2912 °F).
Notice: If the measured value is beneath this minimum temperature
will not be stored!
6.5. Energy saving mode
The energy saving mode will shutdown energy intensive processes (e.g. LED dispays).
These status will be reached after not using the instrument for the presetted time (in se-
conds). The instrument will not shut down completely and will be in measuring mode immi-
deatly after pressing the measuring button. The tome presetted must be less then the time
presetted in automatic shutdown.
Display:
You can set the time until the instrument switches to energy saving mode by
+
or
-
in
seconds.
6.6. Automatic shutdown
The instruiment will shut down completely after not using it for the presettet time
(in seconds).
After pressing the measuring button the instrument will maintain a short self-test which will
take a few seconds before reaching measuring mode.
Display:
You can set the time until the instrument shut down automatically in seconds
by pressing
+
or
-
.
6.7. Temperature unit
Display: or
To toggle between Deg Celsius and Deg Fahrenheit press
+
or
-
.
.
IMPAC Handpyrometer IGA315-K USB