LumaSense Technologies IGA 5-LO - Handbuch (Seite 19)

IMPAC pyrometers IS 5 · IS 5-LO · IGA 5 · IGA 5-LO
19
9.4 The menu
Opens a saved file
Storage of measured values for further processing
Online measurement with color bar display
Online measurement with graphic display
Setting of the parameters of the instrument
Setting of interface, baud rate and pyrometer addresses (RS485)
Time interval between two measurements
Number of connected instruments (max. 2)
Listing of measured or stored values in tabular form
Processing of measured (stored) readings in graph form
Processing of measured (stored) readings in a text file
Calculation of spot sizes in various measuring distances
Only if available: controls the programmable controller PI 6000
9.5
Beginning
Before using the software, the serial interface connected to the pyrometer has to be selected under
the Computer icon. For two devices using the RS232 interface, two PC interfaces must be used.
9.6
Number of devices
With a click on “number of devices” InfraWin changes to the display of 1 or 2 devices. If 2 devices
are selected, always 2 windows are displayed for settings or evaluation.
9.7
Basic settings
Under pyrometer parameters all preset values can
be displayed and modified if necessary.
This window contains all parameter settings described in
section 7 and 8.
Choose the correct setting for your application, the actual
setting is displayed.
Notes:
• “Basic range” displays the total range of the pyrometer
automatically and can not be changed.
• Under “Material“ you have the possibility to store the
names of different measuring objects with their emissivity
values and to recall them from the list.
• Choose whether the temperature should be displayed in
°C (Celsius) or °F (Fahrenheit).
• If the pyrometer is equipped with a
laser targeting light the laser icon ( )
is visible. A click on the laser targeting
light icon turns the laser targeting light
on or off at this point. After approx. two minutes the laser
targeting light is switched off automatically.
• At models with built-in video module a TV icon instead of the laser icon is shown ( ) where some ad-
vanced display settings can be done.