Monoprice 6659 4-channel H.264 Digital Video Recorder - Handbuch (Seite 7)

CONNECTION AND SETUP
4
3. CONNECTION AND SETUP
3.1. HDD Installation
The HDD must be installed before the DVR is turned on.
Step 1: Loose the screws on the upper cover and remove it from the DVR. Find the two HDD brackets located on
the DVR base as indicated below.
Step 2: Get a compatible HDD, and connect it to the power connector and data bus connector.
Step 3: Make sure the PCB side is facing up, and place the HDD between the HDD brackets on the DVR base as
shown below.
Make sure the other side of the HDD is contacted with the DVR base for heat conduction.
Step 4: Align the screw hole on the each bracket with the screw hole on the each side of the HDD as shown
below, and fix the HDD to the bracket with a HDD screw supplied.
Step 5: Close the upper cover of the DVR, and fasten all the screws you loosened in Step 1.