Spektrum SPM2800US DX10t - Handbuch (Seite 10)

10 SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
6-9 Model Copy
The Model Copy function copies the currently selected
model programming to another model memory.
6-10 Model Reset
The Model Reset resets the programming for the selected
model to factory defaults.
6-11 Warnings
The radio is equipped with warning systems for your
safety. If a parameter oversteps the programmed critical
value, for example in throttle settings or in a rudder
position, it will initiate the warning.
Selectable warning signals are:
• Sound
• Vibration
• Sound and Vibration
6-12 Telemetry
The DX10t offers different telemetry functions. This
allows the transmitter to both send information to the
receiver and receive real-time information back that can
be shown on display. This feature requires the additional
Telemetry Module and Sensors (sold separately).
Telemetry values are:
• RPM
• Voltage Flight Battery
• Temperature
• Altitude
• Airspeed
• Receiver Battery voltage
• Flight Log Data
• 8G G-Force
• 40G G-Force
• Variometer
• GPS
• LiPo Battery Capacity
• High Current 150A Sensor
• JetCat Turbine Sensor
6-13 Preflight Check
Preflight Setup can be programmed to appear each time
the transmitter is turned on or only when a new model
is selected. You must select each check box before the
flight. RF modulation can be on or off during this phase.
Available check questions are:
• Transmitter Antenna Extended
• Receiver Battery Test
• Fuel Tank Full
• Hatch Attached
• Wing Bolts Secured
• Air in Retracts
• Prop Secured
• Reset Timer
• Flap Position
• Ignition Battery Charged
• Fuel Plug in Place
• Flight Battery Charged
• Throttle Trim Position
• Gyro Initialized
• Gyro Gain Position
• Governor Gain Position
• Glow Driver Activated
• Blade Bolts Tightened
The menu offers 6 checklists with 6 parameters
displayed. You can activate the check time per each
flight or one time a day.