Spektrum SPM2800US DX10t - Handbuch (Seite 13)

13 SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
7. BASIC FUNCTION LIST PROGRAMMING IN THE FUNCTION MENU
Attention: If you activate more channels in the System Settings, you have to program them in the Function menu.
6-21 Transfer SD Card
With this menu you can transfer model memories onto
an SD Card and create model memory space in the
transmitter. The included 1GB card has the capacity to
store up to 3000 Models.
Options in the menu are:
• Import Model : One selected Modell will be transferred
from card.
• Import all Models: All models will be transferred from
card.
• Export Model: One selected model will be exported to
card
• Export all Models : All models will be exported to card.
• Update Firmware
To enter the Function List while powered on, press the
roller at the main menu screen to enter the Function List.
Functions are:
• Servo Setup
• D/R and Expo
• Throttle Cut
• Throttle Curve
• Mixing
• Range Test
• Timer
• Telemetry
• Monitor
7-1 Servo Setup
In this menu, you program all settings for servo
parameters.
Parameters are:
• Travel
• Sub-Trim
• Reverse
• Speed
• Absolute Travel
• Balance
7-1-1 Travel
In this menu, you program travel for all 10 channels.
Default channels are: Throttle (THR), Aileron (AIL),
Elevator (ELEV), Rudder (RUD) Gear (GER).
The Display shows travel in percentage and graphics.
7-1-2 Sub-Trim
You can adjust Sub-Trim settings with the Roller.
7-1-3 Reverse
Programming of Servo Reverse function will be done in
this menu. Reverse Information is shown in the graphic.
7-1-4 Speed
Programming of the Servo Speed function will be done in
this menu.