Spektrum SPM2800US DX10t - Handbuch (Seite 17)

17 SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
8-6 Channel Assignment
This menu is for assigning functions to channels. The
Display shows 6 servos you can assign.
Channel 1 Throttle
Channel 2 Aileron
Channel 3 Elevator
Channel 4 Rudder
Channel 5 Gyro
Channel 6 Pitch
Channels 7 – 10 are not assigned.
8-7 Trim Setup
In this Menu, you can adjust trim sensitivity. The mean
value is 5 Largest steps with 10, no steps with 0.
8-8 Model Copy
The Model Copy function copies the currently selected
model programming to another model memory.
8-10 Warnings
In this screen, you select warnings and assign them to
functions that will be active when values are exceeded.
8-11 Telemetry
The transmitter offers different Telemetry functions. This
means the transmitter sends signals to the model and
receives signals via a telemetry module and sensors
mounted within the model. For this function, you need a
telemetry module and sensors that are sold separately.
With telemetry, you check the following values:
• RPM
• Voltage Flight Battery
• Temperature
• Altitude
• Airspeed
• Receiver Battery voltage
• Flight Log Data
• 8G
• 40G G-Force
• Variometer
• GPS
• LiPo Battery Capacity
• High Current 150A Sensor
• JetCat Turbine Sensor
8-9 Model Reset
The Model Reset resets the programming for the selected
model to factory defaults.
8-5 Editing the Flight Mode Name
In this menu, you can verify the names for the Flight
Mode. Presets are Autorotation and Flight Mode 1.