Festo Неполноповоротные приводы DRQD-6...12 - Handbuch (Seite 30)

DRQD-6/ ... /12-...
Festo DRQD-6/ ... /12-... 0109a English
30
S Comply with national and local safety laws and regulations.
S Remove all packaging.
The individual materials can be disposed
of in recycling containers (except oil-im-
pregnated paper which cannot be used
again).
S Once the energy medium has been se-
lected, you should retain this for the en-
tire service life of the product.
Example:
If non-lubricated compressed air is se-
lected, then always use non-lubricated
compressed air.
S Slowly pressurize your complete system.
In this way you can avoid uncontrolled
movements.
Safety start-up valve type HEL-... should
be used for slow pressurization when
starting.
S Please observe the warnings and instruc-
tions
– on the product
– in these operating instructions.
S Use the product in its original form. Un-
authorized modification is not permitted.
S Leave all screws and threaded pins in their
original state if no immediate demand for
modification is specified in these instruc-
tions.
For safety reasons, the screws and pins
are fixed with locking adhesive.
Fig. 6
Fig. 7
Fig. 8