Thermalright Archon SB-E X2 - Handbuch (Seite 10)

7
Installation Instructions:
Step 1:
Step 2:
Step 3:
Step 1 : Part Installation
Apply the Anti-Vibration Pads to each corner of the Heatsink Body. Then pull the long end of the Fan
Clips and make it go through the bottom side hole closest to the edge as shown in the close-up diagram.
Repeat this with the top hole.
Step 2 : Screw Pillar Installation
Screw on the 4 LGA2011 Type C Screw Pillars into the heatsink studs on the Intel ILM Assembly Frame
around the processor socket.
Step 3 : Anchoring Mount Installation
Place the Anchoring Bracket Mount on top of the 4 LGA2011 Type C Screw Pillars. Then tighten the 4
LGA2011 Type C Screw Pillars with the Thumbscrew Caps.