Thermalright Archon SB-E X2 - Handbuch (Seite 7)

The Ultimate Cooling Solutions!
www.thermalright.com
4
Step 5: Step 6:
Step 7:
Step 8: Step 9:
Step 5 : Place the Anchoring Bracket Mount on
top of the four Screw Pillars. Tighten the 4 Screw
Pillars with the Thumbscrew Caps.
Step 8 : Fan Installation
Place the included TY-141 fan onto the Heatsink
Body. And then secure it with the TY-141 Fan
Clips, by pulling the Fan Clips to place the four
ends at the four holes on the TY-141 Fan.
Step 6 : Applying Thermal Paste
Apply the Thermal Paste to the base of the
Heatsink and the surface of the CPU evenly.
Step 7 : Mounting Plate
Fit the heatsink then secure it by placing the Pressure Adjustable Mounting Plate, and tighten the
hexagonal screws to the Anchoring Bracket Mount.
Tighten the central knob on the Pressure Adjustable Mounting Plate with the Angled Wrench as seen
fit. (The central knob can add an addition 30lbs of force to the cooler, each half rotation adds 10 lbs of
force for a total of 70lbs)
Step 9 : Installation completed
Connect the two TY-141 fans to the PWM Y-Cable
then connect the cable to the CPU PWM Fan
socket on the motherboard. Installation complete.
1/2 rotation
(+10 lb.) (-10 lb.)