Thermalright Archon SB-E X2 - Handbuch (Seite 14)

11
Installation Instructions:
Step 1:
Step 2:
Step 3:
Step 1 : Part Installation
Apply the Anti-Vibration Pads to each corner of the heatsink. Then pull the long end of the Fan Clips
and make it go through the bottom side hole closest to the edge as shown in the close-up diagram.
Repeat this with the top hole.
Step 2 : Backplate Installation
Choose the correct Backplate according to your system (AMD). Pass the Backplate through mounting
holes on the mainboard, then fit the Screw Pillars to the Backplate screws.
Step 3 : Backplate Cap
Place the Anchoring Bracket Mount on top of the four Screw Pillars. Tighten the 4 Screw Pillars with the
Thumbscrew Caps.