Thermalright Archon SB-E X2 - Handbuch (Seite 15)

The Ultimate Cooling Solutions!
www.thermalright.com
12
Step 4:
Step 5:
Step 6: Step 7:
Step 4 : Anchoring Mount Installation
Place the Anchoring Mount on the Screw Nuts. Use the four M3L6 Screws to fix the Anchoring Mount
on to the Screw Nuts.
Step 6 : Fan Installation
Place the included TY-141 fan onto the
Heatsink Body. And then secure it with the TY-
141 Fan Clips, by pulling the Fan Clips to place
the four ends at the four holes on the TY-141 Fan.
Step 5 : Mounting Plate
Fit the heatsink then secure it by placing the Pressure Adjustable Mounting Plate, and tighten the
hexagonal screws to the Anchoring Bracket Mount.
Tighten the central knob on the Pressure Adjustable Mounting Plate with the Angled Wrench as seen
fit. (The central knob can add an addition 30lbs of force to the cooler, each half rotation adds 10 lbs of
force for a total of 70lbs)
Step 7 : Installation completed
Connect the two TY-141 fans to the PWM Y-Cable
then connect the cable to the CPU PWM Fan
socket on the motherboard. Installation complete.
1/2 rotation
(+10 lb.) (-10 lb.)