Thermalright Archon SB-E X2 - Handbuch (Seite 6)

3
Installation Instructions:
Step 1:
Step 2:
Step 3: Step 4:
Step 1 : Part Installation
Apply the Anti-Vibration Pads to each corner of the Heatsink Body. Then pull the long end of the Fan
Clips and make it go through the bottom side hole closest to the edge as shown in the close-up diagram.
Repeat this with the top hole.
Step 2 : Backplate Installation
Choose the correct Backplate according to your system (Intel), and adjust the Screw Cylinders according
to your platform. Place the four white washers through the protruding screws.
Step 3 : Backplate Cap
Use the Backplate Cap only for the 775 platform.
Step 4 : Pass the Backplate through mounting
holes on the mainboard, then fit the Screw Pillars
to the Backplate screws.
1366
775
1156
1155