Weidmuller PMX400HZX - Display instrument for control panel - Handbuch (Seite 19)

1
•Connections
Terminal Signal
1 Neutral / –
Power supply
2 Live / +
3 Output +
Analogue output
(/AO option only)
4 Output –
5 Common (0V)
Alarm channels one and two are
Solid state switches (max ‘off-state’
voltage = 50 V DC/max ‘on-state’
current = 200 mA )
6 Channel one output
7 Channel two output
8 Link to 12 to allow access to set-up mode (normally left unconnected)
9 Pull (Link to 12 for pull-up/Link to 10 for pull-down)
Inputs
10 Signal –
11 Signal +
12 Regulated 12 V DC out (Ov is connected to pin 10 internally)
13 Normally Closed
Alarm channel three
(optional)
14 Common
15 Normally Open
16 Normally Closed
Alarm channel four
(optional)
17 Common
18 Normally Open