Weidmuller UPIR - Analog to frequency converter - Handbuch (Seite 19)

1
Connections
Strip wires to  mm from the ends. Use a suitable ferrule for multi-
stranded wires (do not solder).
Use 12-28 AWG Cu Wire rated for temperatures above 0 °C Only,
tighten to 4.5 lb-In.
For effective protection from electromagnetic noise, all signal cables
must be shielded, or located on conductive trays or in conduits.
Terminal Signal
1 24 V DC (out)
Input signals
2 Current +
3 Common −
4 Voltage +
5
Not used
6
7
Link to change the set-up Security Link
8
9 Neutral (−)
Power supply
10 Live (+)
11 Normally Closed
Alarm Channel One 12 Common
13 Normally Open
14 Normally Closed
Alarm Channel Two 15 Common
16 Normally Open
Case Earthing is via a stud on lower side of case