Weidmuller URTAR - Universal glavanically isolated signal converter - Handbuch (Seite 16)

16
Clearingtrippedalarms
You can acknowledge a tripped alarm by simply pressing the key for
that channel (ï for Alarm 1 or ENT for Alarm 2).
Displayingthealarmsetpoints
To check a setpoint, simply press the key for that channel (ï for Alarm
1 or ENT for Alarm 2). If the alarms are disabled the display will show
---- .
Adjustingthealarmsetpoints
To change a setpoint, hold down the key for that channel (ï for Alarm
1 or ENT for Alarm 2). You will then be able to change the value using
the arrows. Release the key to save the value.
Note: There are limits for the setpoint values that depend on the input
range setting and you cannot change the value if setpoint security is on.
Cleaning
The case can be wiped with a damp cloth. De-energise the unit before
cleaning.