Citizen Systems iDP-460 - Handbuch (Seite 53)

iDP-460 User’s Manual
53 CITIZEN
ESC d P-250, P-900R
[Name] Request Printer Status
[Code] <1B>H<64>H
[Function] In the P-250 mode and P-900R mode, this command sends the following 1-byte
status messages shown below. This command is valid only for the serial
interface.
Value
Bit Code Function
0 1
0 L Paper end With paper Without paper
1 X Not defined
2 X Not defined
3 X Not defined
4 X Not defined
5 1 Unused - - Fixed at 1
6 F Mechanical error Without error With error
7 P Parity Fixed at 0 - -
[Caution] This command is ignored for the parallel interface and in the P-200 mode. If
the paper runs out or there is a mechanical error, the data may not be
received.
[See Also] ESC a
ESC e (n) ; P-250, P-900R
[Name] Set Right Margin
[Code] <1B>H<65H>(n)<3B>H
[Domain] 0 ≤ (n) ≤ 42 (<30>H ≤ n ≤ <39>H)
[Function] In the P-250 mode and P-900R mode, this command controls whether the
characters should be printed or at which position of the line they should be
printed, when the buffer is full. When the parameter is set between 1 and 41,
the printer will print automatically when the n-th printable character is
received. If the parameter is set beyond these limits, printing will be
performed when the LF command is received.