Citizen Systems iDP-460 - Handbuch (Seite 54)

iDP-460 User’s Manual
54 CITIZEN
[Caution] Be sure to add ";"(<3B>H) to the end of the parameter. This command is
ignored in other than the P-250 mode and the P-900 mode.
[Initial Value] The characters are printed after the LF command is received in the
42-columns mode.
[Sample Program] When setting the right margin to 10
ESC e 10 ; → LPRINT CHR$(&H1B)+”e10;”;
<1B>H<65>H<31>H<30>H<3B>H
[See Also] SO, SI, RS, US
ESC h (n) ; ALL
[Name] Select Character Set
[Code] <1B>H<68H>(n)<3B>H
[Domain] 0 ≤ (n) ≤ 10 (<30>H ≤ n ≤ <39>H)
[Function] This command selects the character sets of the countries listed below,
depending on the n-value.
[Caution] Be sure to add ";"(<3B>H) to the end of the parameter. As shown separately,
the character sets replace part of characters. If the n-value is specified
beyond the limits, this command will be ignored.
[Initial Value] n = 0
n Function
0 U.S.A.
1 France
2 Germany
3 U.K.
4 Denmark I
5 Sweden
n Function
6 Italy
7 Spain
8 Japan
9 Norway
10 Denmark II