Losi Spektrum DX3S Radio - Handbuch (Seite 12)

12 SPEKTRUM DX3S USER GUIDE
Press the Rolling Selector to enter the highlighted
channel’s travel function.
Rotating the Rolling Selector will now adjust both the
upper and lower values simultaneously. If you desire
to adjust the upper or lower directions independently
then move the corresponding channel’s wheel, throttle
trigger, or switch that the channel is assigned to and that
value alone will be highlighted. For example, turning the
steering wheel to the right will highlight the right value
only and subsequent adjustment will affect the right travel
only.
Note: The DX3S features “sticky gooey.”
When the corresponding channel is moved
to the desired position and released, as
illustrated above, the value on that side
remains highlighted. Moving the channel
in the opposite direction will then highlight
the opposite direction’s value. This allows
convenient independent travel adjustments
without having to hold the wheel or trigger in
the desired position. To highlight both values
again after moving the control in one direction,
simply press the Rolling Selector twice with
the control centered and both values will be
highlighted.
To return to the main screen press and hold the Rolling
Selector for more than three seconds.
Travel
The Travel screen (sometimes referred to as travel adjust
or end points) allows independent travel adjustment of
the servo throw in each direction of all three channels
or ESC on the throttle channel (steering, throttle and
auxiliary) when mixing is disabled.
To aCCess The Travel funCTIon
From the list screen rotate the Rolling Selector to
highlight the Travel function.
Press the Rolling Selector to enter the Travel function.
The Travel screen will be displayed as shown above.
Rotate the Rolling Selector and highlight the values
desired next to the channel that you wish to adjust.
ST= Steering
TH= Throttle and brake
AX= Auxiliary Channel 3 (when mixing is disabled)