Chariot Carriers Chariot Baby Seat - Handbuch (Seite 43)


2.1.2 Refitting the fastex buckles for centre-fitting of the baby seat
Note: The baby seat can be either fitted to one side or in the centre. This step should only be carried
out if you want to fit the baby seat in the centre.
For centre-fitting the fastex buckles on the two ends of the lap belts need to be swapped round.
After swapping them round, thread the fastex buckles as shown in the illustration.
Arrangement of fastex buckles
needed for centre-fitting of the
baby seat
Front view.
Fitted telescopic tube, shown
from inside the trailer. Fitted telescopic tube, shown
from the front.
Please note:
Always screw on the telescopic tube to the side of the frame tube that is opposite the
threaded bush, in other words from the inside of the vehicle. This results in the threaded
bush being pulled into the frame tube hole, meaning that it cannot work loose.