Chariot Carriers Chariot Baby Seat - Handbuch (Seite 51)

1
2.2.. Securing the safety belts
Insert the fastex buckles from
the front through the lower or
upper slots in the baby seat,
depending on the size of the
child,… ...and reconnect both buckles
behind the seat. The two fastex
buckles on the backrest should
be in the lowest position.
Loosen the fastex buckles on the padded shoulder harness on the backrest of the trailer seat and
take it off.
The shoulder harness and
crotch straps can now be
connected by closing the fastex
fastener on the front of the
baby seat.
For side-fitting, use the two outer fastener units, and, for centre-fitting, the two in the centre.
The shoulder padding can be
turned over at the top so that
the shoulder strap can be
sufficiently shortened. If necessary, the lower con-
necting strap of the shoulder
padding can also be
unstrapped and the shoulder
padding turned over there as
well. For all other children, the
shoulder strap can be drawn
through the upper flaps of the
padding to prevent the padding
being able to slip to the side.
Fitted baby seat ready to use in the centre and side position:
Please note:
Never transport your
children without the safety
belts being properly and
fully adjusted, otherwise
your child could be
seriously or even fatally injured
in the event of an accident!