AMT Datasouth Fastmark M3 - Handbuch (Seite 15)

~ 15 ~
Battery charging
It takes 2~3 hours to fully charge the battery before the first time usage. The
lifetime of the battery is 300 times for charge/discharge cycles.
1.
Open the interface cover
and plug the power cord to
the power jack.
2.
Plug the power adaptor into
an appropriate power outlet.
3.
When the battery is
charging, the status LED
indicator is solid amber.
Safety Warning:
Turn OFF printer power before
pluging in power adater. DO NOT
remove battery from printer while
charging
Note:
When charging is complete
(approximately 4~8 hours) the amber
LED will turn off.