AMT Datasouth Fastmark M3 - Handbuch (Seite 33)

~ 33 ~
Printer functions
1.
Connect the printer and PC via USB cable.
2.
Turn ON printer and start DiagTool utility.
3. Click the “Function” button for settings.
4.
The detail functions in the Printer Function Group are listed as below.
(Calibrate sensor, media setup, RTC setup…)
Function Description
Calibrate Sensor
Calibrate the sensor specified in the Printer Setup
group media sensor field
Ethernet Setup
Setup the IP address, subnet mask, gateway for
the on board Ethernet
RTC Setup Synchronize printer Real Time Clock with PC
Factory Default
Initialize the printer and restore the settings to
factory default.
Reset Printer Reboot printer
Print Test Page Print a test page
Configuration Page Print printer configuration
Dump Text To activate the printer dump mode.
Ignore AUTO.BAS Ignore the downloaded AUTO.BAS program
Exit Line Mode Exit line mode.
Password Setup Set the password to protect the settings
For more information about Diagnostic Tool, please refer to the diagnostic utility
quick start guide on the CD disk \ Diagnostic Utilities directory .