AMT Datasouth Fastmark M3 - Handbuch (Seite 25)

~ 25 ~
Self-test and Dump Mode
Follow the steps below to print Self-test and enter Dump Mode.
1.
Turn off the printer power.
2.
Hold on the FEED button then turn on the power button
3.
Release the power button when the LED color turns
amber, continue pressing the FEED button.
4.
Release the FEED button when the LED indicates
and blinking. The LED will sequence right to left, 5 blinks each.
5.
The printer will calibrate the sensor, measure the media length/height,
print internal settings and the enter Dump Mode.
6.
Power OFF and back On to exit Dump Mode and resume normal
printing.