Beurer AS 50 - Handbuch (Seite 23)

21
G
B
Display 3:
Middle line: Time of day
Back to
Display 1
.
Attaching the activity sensor
There are various possibilities to wear the activity sensor: on your
belt/trouser waistband (recommended wearing method), in your trou-
ser pocket or as a wristwatch.
Pay attention to adjust the sensitivity of the device differently
depending on how it is attached. We recommend wearing the
activity sensor on your belt to get the most accurate results of
the device as possible!
Only change between belt clip and wristband if necessary.
Changing too frequently wears out the material of the wristband.
Wearing the activity sensor on your belt/trouser waistband
You can attach your activity sensor to your belt or your trouser waist-
band with the supplied belt clip. To do this, put the activity sensor into
the belt clip as follows:
Put the casing into the belt clip. Pay
attention that the USB connector (1) is
fixed on the side of the clip with the
notch. The casing has to be firmly and
directly attached to the belt clip, it must
not be loose. Otherwise there is a risk
of the device detaching itself and possi-
bly getting damaged.