Beurer AS 50 - Handbuch (Seite 25)

23
G
B
Wearing the activity sensor as a wristwatch
Your activity sensor can be worn on your wrist like a wristwatch. To
do this, please use the wristband supplied. To attach the device to the
wristband proceed as follows:
Put the casing into the wristband. Lift
the bars (1), which enclose the buttons
on the side, carefully over the buttons.
Pay attention to the position of the USB
connector (2).
The casing has to be firmly and directly
attached to the wristband, there must
be no gap. Otherwise, there is a risk of
the activity sensor's casing detaching
itself.
For the majority of users, sensitivity levels 1 or 3 are ideal when
wearing the activity sensor as a wristwatch. However the value
should be adjusted individually.
Pace counting on the activity sensor
As soon as you have run at least 10 paces in one go, the number of
paces and the activity time are updated on the display. These initial
paces are taken into account for pace counting.
Change basic settings
Set sensitivity and change basic functions
To achieve an optimum result, the sensitivity of the device should be
individually set for the user. Five sensitivity levels can be selected
here (1=Low sensitivity, 5=High sensitivity). The slower your running
speed, the higher sensitivity level you should select.