JB-Lighting Wireless TRX - Handbuch (Seite 13)

13
Following the instruction for updating:
1. Disconnect Wireless TRX from mains and remove all DMX cables.
2. Connect the upgrade-Dongle to the Wireless TRX, use a 5-pin DMX cable (all pins
glazed). Connect the USB cable with the USB port from the PC.
3. Recall the program-start on your PC and select the program for the Upgrade-
Dongle.
4. Keep the ESC button of the Wireless TRX pressed (left button under display).
5. Connect the Wireless TRX to mains again. The browse window will open in the PC.
6. Choose the desired file on your PC.
7. Start the update procedure by selecting "open"
8. After completing the update the message "Update complete" will be displayed on
the PC and the Wireless TRX is ready for use.
Release the ESC button of the Wireless TRX.