4 protection against electric shock, 5 preventing the risk of fire, 6 preventing injury – Silvercrest SDG 800 B2 Benutzerhandbuch

Seite 8

Advertising
background image

6

repairs. This also applies to repairs
undertaken by unqualified persons. You
will find the service address in “Service
Centre” on page 19.

• If the appliance should develop a fault

during the warranty period, it may only
be repaired by our Service Centre.
Otherwise all claims under warranty are
null and void. You will find the service
address in “Service Centre” on
page 19.

4.4 Protection against electric shock

Warning! The following safety
information is intended to protect
you against electric shock.

• Only connect the appliance to a mains

socket with an earthing contact as this
provides protection against electric
shock.

• The appliance must not under any

circumstances be used if it is damaged.
Have the device repaired in such cases
by a qualified specialist. The contact
data can be found in “Service Centre”
on page 19.

• If the mains cable for this appliance is

damaged, it must be replaced by the
manufacturer or a person with similar
qualifications in order to avoid a
hazard.

• Never touch the appliance, the mains

cable or the mains plug with wet hands.

• Always unplug it by pulling out the plug,

never pull on the cable itself.

• Ensure that the mains cable is not kinked,

twisted or crushed.

• Keep the mains cable away from hot

surfaces, such as the top of a stove.

• If you are not going to use the appliance

for a while, remove the plug from the
wall socket. Only then is the appliance
completely free of current.

• Avoid using extension cables. These

may only be used under very specific
conditions:
– the extension cable must be able to

handle the amount of current drawn
by the appliance,

– the extension cable must not be

"suspended". Keep children away
from it and ensure that it does not
present a trip hazard,

– under no circumstances use a

damaged extension cable,

– do not connect any other appliances

to the mains socket, since it could
cause an overload (do not use
multiple sockets of any kind).

4.5 Preventing the risk of fire

Warning! As the appliance
operates at high temperatures,
follow the safety instructions below
to prevent a fire starting.

• Never leave the appliance running

unsupervised. Damage is almost always
indicated by intensive odours. In this
case, disconnect the power supply
immediately and have the appliance
examined. Contact details can be found
in “Service Centre” on page 19.

4.6 Preventing injury

Warning! To prevent injury,
please observe the following
information.

• Make sure that the power cord never

becomes a trip hazard, that no-one can
get tangled in it or tread on it.

• Never put in too much water, otherwise

hot water might splash out. You can read
off the water level on the water level
indicator 13. It should always be
between MAX (1.2 l) and MIN (0.2 l).

RP102978 Dampfgarer LB6so Seite 6 Dienstag, 9. September 2014 11:07 11

Advertising