Before first use, Hob - daily use, Hob - helpful hints and tips – AEG 30006VL-WN Benutzerhandbuch

Seite 8: 1 initial cleaning, 2 preheating, 1 heat setting, 2 residual heat indicator, 1 cookware

Advertising
background image

4. BEFORE FIRST USE

WARNING!
Refer to the Safety chapters.

4.1 Initial Cleaning

• Remove all accessories and removable

shelf supports (if applicable).

• Clean the appliance before first use.

Refer to the chapter "Care and
cleaning".

4.2 Preheating

Preheat the empty appliance to burn off
the remaining grease.

1.

Set the function

and the maxi-

mum temperature.

2.

Let the appliance operate for 45 mi-
nutes.

3.

Set the function

and the maxi-

mum temperature.

4.

Let the appliance operate for 15 mi-
nutes.

Accessories can become hotter than
usually. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow is sufficient.

5. HOB - DAILY USE

WARNING!
Refer to the Safety chapters.

5.1 Heat setting

Knob

Function

Keep Warm

0

Off position

1-9

Heat settings
(1 - lowest heat setting, 9 -
highest heat setting)

1.

Turn the knob to a necessary heat
setting.

2.

To stop the cooking, turn the knob
to the 0 position.

Use the residual heat to decrease
energy consumption. Deactivate
the cooking zone approximately
5-10 minutes before the cooking
is completed.

5.2 Residual heat indicator

The residual heat indicator comes on
when a cooking zone is hot.

WARNING!
There is a risk of burns from re-
sidual heat.

6. HOB - HELPFUL HINTS AND TIPS

WARNING!
Refer to the Safety chapters.

6.1 Cookware

• The bottom of the cookware

must be as thick and flat as
possible.

• Cookware made of enamelled

steel and with aluminium or
copper bottoms can cause the
colour to change on the glass-
ceramic surface.

8

www.aeg.com

Advertising