WIKA CPB5000HP - Handbuch (Seite 26)

Pressure Balance High-Pressure GB
CPB 5000 HP
WIKA Operating Instructions Pressure Balance High-Pressure Version 2.3 26
2) The lowest pressure change value that is reached based on the standard weight set. A fine weight set is also available for
lower values.
3) The accuracy is in reference to the measurement value, from 10% of the measurement range. A fixed error is considered
in the lower area in reference to 10% of the area.
4) Measurement uncertainty assuming reference conditions (room temperature 20°C, air pressure 1013 mbar, relative
humidity 40 %). Corrections may be required for use without CalibratorUnit.
Dimensions
Scope of supply
■ Instrument base with dust cover
■ Initial pressure pump
■ Spindle pump for pressure generation/fine
adjustment
■ Connection for piston cylinder system
■ Connection for test devices with 3 threaded
adapters M16x 1.5 / M20 x 1.5 and 9/16-18 UNF
■ Piston cylinder system with bell jar
■ Basic mass set devided into 2 carrying cases
■ Mass-set extension in 1 carrying case (for 4,000 bar or
60,000 psi resp. in 2 carrying cases for 5,000 bar or
70,000 psi)
■ Mass-set manufactured to standard gravity (9.80665 m/s²)
■ Operating fluid 1.0 litre (up to 4,000 bar/
60,000 psi)
■ Operating fluid 0.5 litre (for 5,000 bar/
70,000psi)
■ Wrenches 36 flats and 46 flats
■ Operating instructions in German and English
■ Factory calibration certificate
Options
■ Systems with increased accuracy to 0.02 %
■ Mass-set manufactured to local gravity
■ DKD/DAkkS calibration certificate