Baumer TA202 - Handbuch (Seite 13)

TA202
www.baumer.com 13
Error 1: Format error (incorrect location of <ETX>). This error appears in
case the data format was not kept during programmation (example:
During programmation of the limit value only 5 data digits instead
of 6 are being transferred).
Error 2: Line (position) not existing or separating line only
Error 3: Parameter error (void value in the protocol). Example: The limit value
does not consist of numbers but also of other void signs or is not
within the permitted range
7. Chart of control tokens applied
Control Sign Hex Decimal
<STX> 02 02
<ETX> 03 03
<ACK> 06 06
<CR> 0D 13
<DC1> 11 17
<CAN> 18 24
<DEL> 7F 127