Denon DN-S3000 - Handbuch (Seite 12)

12
ENGLISH
7 SCRATCH
q
w
1
Select Scratch source
q Select the source to be
scratched using the
SCRATCH MODE button.
Each short push of the
SCRATCH MODE button switches
between MAIN and SAMPLER.
MAIN:
The SCRATCH MODE button
light up in orange.
SAMPLER: The SCRATCH MODE button
light up in green.
• If scratching is possible, the LED for the
selected source flashes.
• If scratching is not possible immediately,
because for example the Sampler
setting has not been made, the LED for
the selected source lights without
flashing.
You can Scratch in CD or Sampler mode.
2
[Scratch Disc]
w When MAIN is selected as
the Scratch mode and
Scratch Disc is turned by
hand, the Main Track (CD)is
scratched.
When SAMPLER is selected as the Scratch
mode and Scratch Disc is turned by hand,
the sample is scratched.
6 NEXT TRACK RESERVE
• It is possible to standby at the beginning of the next
track to be played while continuing to play the
current track and to start playback of the next track
without interrupting playback.
1
2 -1
Enter Next Track mode
q When the NEXT TRACK
button is pushed, the NEXT
TRACK RESERVE function is
turned on.
• When this mode is set, this button and
CUE button blink.
• When the button is pushed again, the
NEXT TRACK RESERVE mode is turned
off.
Select the track
w Turn the
PARAMETERS knob and
select for the next track to
be played.
2 -2
Select the MEMO
e The CUE point of MEMO can
be selected as NEXT TRACK.
• When the NEXT TRACK with which
MEMO is memorized is selected,
“MEMO“ is displayed on a character
display.
• If the MEMO button is pushed at this time,
the CUE point memorized as NEXT TRACK
can be selected.
• It will be canceled the next track is
selected by PARAMETERS knob.
3
Track search start
r When the CUE button is
pushed after selecting the
track, current playback
continues, but the next track is
searched for and the standby
mode is set. When the
standby mode is set, the CUE
button lights up and the
PLAY/PAUSE button flashes.
• At this time , loop playback is continued
during the loop play for less than 8 seconds.
In the case of beyond it, loop play is turned
off, and it returns to normal playback.
• The time display indicates the remaining
playback time for data in the memory.
NOTE:
The amount of time for which
playback of the currently continuing
track can be continued is a maximum
of 15 seconds from the time
searching for the next track starts.
PARAMETERS
ON / OFF
PUSH
q
w
e
r
t
4
Next Track playback start
t When the PLAY/PAUSE
button is pushed, the current
playback is stopped and
playback of the next track
starts.
• If the PLAY/PAUSE button is not pushed
after standing by at the next track, when
in the CONT. playback mode, playback of
the next track starts once all of the
currently playing playback data has been
played.
When in the SINGLE playback mode,
playback stops once all of the currently
playing playback data has been played.