Denon ADV-1000 - Handbuch (Seite 12)

NO (power does not turn off automatically)
Setup
PAL
Default settings
QUICK SETUP
12
ENGLISH
10 SETTING UP THE SYSTEM
• Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 5 to 8),
make the various settings described below on the monitor screen using the ADV-1000’s on-screen display function.
• Use the following buttons to set up the system:
(1) System setup items
VOLUME
ENTER
BAND
MODE
MENU
DISPLAY RETURN INPUT MODE SURROUND
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE AUDIO
RT RDS CT PTY
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
DVD
REMOCON MODE
STATUS
CDR/MD/TAPE TUNER/TV/VCR
VCR POWER
TV POWER
NTSC/PAL
MEMO
POWER
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
CURSOR buttons
and : Use these to move the cursors ( and ) to the left and right
on the screen.
and : Use these to move the cursors ( and ) to the up and down
on the screen.
SETUP button
Press this to display the system setup menu.
Setup items and default values (set upon shipment from the factory)
SPEAKER
CONFIGURATION
DELAY TIME
CHANNEL
LEVEL
AV1 VIDEO
OUTPUT
DVD AUTO
POWER OFF
DISC SETUP
OSD SETUP
VIDEO SETUP
AUDIO SETUP
RATINGS
OTHER SETUP
Input the combination of speakers in your system and
their corresponding sizes (SMALL for regular speakers,
LARGE for full-size, full-range) to automatically set the
composition of the signals output from the speakers and
the frequency response.
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and
subwoofer according to the listening position.
At the listening position, listen to the test tones output
from the different speakers and set so that the playback
level from the different speakers is equal.
The power automatically switches to standby if no
operation is performed for 30 minutes while in the stop
mode with the function set to DVD.
Set the audio language, subtitle language and disc menu
language for when playing discs.
Set the wallpaper for the setup and operation screens.
Set the screen size and video system for the TV being
used.
Set the digital audio signal format and the linear PCM
sampling frequency and bit conversion.
Make the playback restriction setting for DVDs with
restricted viewing and set the password required for
changing the setting.
Set the size of the room and the listening position.
FRONT
SP.
SMALL
2.7m (9 ft)
FRONT SP.
SMALL
FRONT & SW CENTER
2.4m (8 ft)
SURROUND
2.1m (7 ft) 2.7m (9 ft)
FRONT L
0 dB
DIALOG SUBTITLE DISC MENU
ENGLISH
WALL PAPER: BLUE
TV ASPECT
4 : 3 PS
DIGITAL OUT
NORMAL
RATING LEVEL
NO LIMIT
CLOSED CAPTION : OFF
TV TYPE
LPCM SELECT
OFF
PASS WORD CHANGE
0000 (Default)
ENGLISH ENGLISH
CENTER
0 dB
FRONT R
0 dB
SURROUND R
0 dB
SURROUND L
0 dB
SUB WOOFER
0 dB
CENTER SP.
SMALL
SURROUND SP.
SMALL
SUB WOOFER
YES
SW FREQ. = 120 Hz / SW MODE = NONE
CENTER
SP.
SMALL
2.4m (8 ft)
SURROUND
SP.
SMALL
2.1m (7 ft)
SUB-
WOOFER
YES
2.7m (9 ft)
ADV
ANCED SETUP
SYSTEM SETUP
DVD SETUP
• Speaker system layout
Basic system layout
•
The following is an example of the basic layout for a system consisting of six speaker systems and a television monitor:
Subwoofer Center speaker system
Front speaker systems
Set these at the sides of the TV or
screen with their front surfaces as
flush with the front of the screen as
possible.
Surround speaker systems
VIDEO OUTPUT DVD RGB OUTPUT
VIDEO NO (VIDEO)
To select whether composite video signals or S video
signals or RGB signals will be output from the AV1 SCART
terminals.
Make the closed caption setting for DVDs. (A
commercially available decoder is required to display the
closed captions.)
ROOM
SPACE
MEDIUM
4.2m x 4.2m
SEATING
POSITION
BACK