Denon ADV-1000 - Handbuch (Seite 28)

28
ENGLISH
LISTENING TO THE RADIO 16
(1) Auto tuner presets
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels 1 to 40.
NOTE:
•
If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station,
then preset it using the manual “Preset memory” operation.
1 Using the TUNER function, press and hold the TUNING
+ and TUNING – buttons of the main unit for 2 seconds
or longer.
• “AUTO PRESET?” and “–: NO/+: START” will
alternately appear on the display of the main unit.
- TUNING +
Main unit
2 Use the TUNING + button to select “START”.
• “SEARCH” flashes on the display and searching begins.
• “COMPLETED” appears once searching is completed.
- TUNING +
Main unit
1,2
• Press the TUNING – button to cancel.
(2) Tuning
3 2 1
Example: Tuning in FM/AM stations
1 Turn the FUNCTION/SELECT knob of the main unit or
press the FUNCTION button of the remote control and
select “TUNER”.
2 Select “FM” or “AM”.
•
The selected “FM AUTO”, “FM MONO” or “AM” is
displayed.
• When using the remote control, the mode button is
used to select FM AUTO and MONO.
FUNCTION
/ SELECT FUNCTION
Main unit Remote control unit
Before operating the remote control unit!
Be sure to press the proper remote control
mode selector button to set the remote control
unit to the AV mode.
TUNER/TV/VCR
BAND
BAND
Remote control unit
MODE
Main unit
VOLUME
ENTER
BAND
MODE
MENU FUNCTION
TOP MENU
MUTE
SUB TITLE ANGLE AUDIO
RT RDS CT PTY
SHIFT CH
TU
STATUS
VCR POWER
TV POWER
NTSC/PAL
MEMO
POWER
1
2
3
2
3 Adjust the receiving frequency.
•
When a station is received, the “TUNED” indication
will light.
NOTE:
A humming sound may be heard when using a TV nearby
while receiving AM programs. If this happens, move the
system as far from the TV as possible.
Auto tuning
•
When one of the Tuning +/– button is pressed, the
frequency changes in steps of 50 kHz in the FM band,
9 kHz in the AM band.
• If one of the Tuning +/– button is held for over 1 second,
the frequency continues to change when the button is
released (auto tuning) and stops when a station is tuned
in.Tuning will not stop at stations whose reception is
poor.
• To stop the auto tuning function, press the Tuning +/–
button once.
FM Stereo Reception
•
When a program being broadcast in “FM AUTO” is
received, the “ST” indicator lights and the program is
received in stereo.
• If reception is poor and there is much noise in the
stereo signals, press the BAND or MODE button to set
the FM MONO mode.
- TUNING +
Main unit
TU
Remote control unit