AEG BE8715001M - Handbuch (Seite 27)

2
1
2. Pull the rear end of the shelf sup-
port away from the side wall and re-
move it.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
The rounded ends of the shelf
supports must point to the front.
12.3 Oven lamp
WARNING!
Be careful when you change the
oven lamp. There is a risk of elec-
trical shock.
Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or
deactivate the circuit breaker.
Put a cloth on the bottom of the
oven to prevent damage to the
oven light and glass cover.
Always hold the halogen lamp
with a cloth to prevent grease
residue from burning on the
lamp.
1. Turn the glass cover counterclock-
wise to remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with an
applicable 300 °C heat-resistant
oven light bulb.
Use the same oven lamp type.
4. Install the glass cover.
12.4 Oven ceiling
You can remove the grill to clean the
oven ceiling more easily.
WARNING!
Deactivate the appliance before
you remove the grill. Make sure
that the appliance is cold. There
is a risk of burns.
1. Remove the screw which holds the
grill. For the first time, use a screw-
driver.
2. Carefully pull the grill down.
3. Clean the oven ceiling with a soft
cloth with warm water and a clean-
ing agent, and let it dry.
4. Install the grill in the opposite se-
quence.
WARNING!
Make sure that the grill is correct-
ly installed and that it does not
fall down.
12.5 Cleaning the oven door
The oven door has three panels of glass
installed one behind the other. You can
remove the oven door and the internal
glass panels to clean them.
CAUTION!
Do not use the appliance without
the glass panels.
ENGLISH
27