AEG BE8715001M - Handbuch (Seite 29)

13. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does
not heat up. The appliance is deactiva-
ted. Activate the appliance.
The appliance does
not heat up. The clock is not set. Set the clock.
The appliance does
not heat up. The necessary settings are
not set. Make sure that the settings
are correct.
The appliance does
not heat up. The Child Lock is activated. Refer to "Deactivating the
Child Lock".
The appliance does
not heat up. The fuse is released. Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact an
authorized electrician.
The display shows
F111. The CT Sensor plug is not
correctly installed into the
socket. Put the plug of core tem-
perature sensor as far as
possible into the socket.
The lamp does not
operate. The lamp is defective. Replace the lamp.
The display shows
“Demo”. The appli-
ance does not heat
up. The fan does
not operate. The test mode is activated. 1. Deactivate the appli-
ance.
2. Touch and hold un-
til the appliance acti-
vates and deactivates.
3. Touch and hold and
at the same time
until an acoustic signal
sounds and “d” goes
out.
ENGLISH
29