LumaSense Technologies IN 2000 - Handbuch (Seite 12)

IMPAC Infrared sensor IN 2000
12
8.4 The start menu
Opens a saved file
Storage of measured values for further processing
Online measurement with color bar display
Online measurement with graphic display
Setting of the parameters of the instrument
Setting of interface, baud rate or pyrometer addresses
Time interval between two measurements
Number of connected instruments (max. 2)
Listing of measured or stored values in tabular form
Processing of measured (stored) readings in graph form
Processing of measured (stored) readings in a text file
Calculation of spot sizes in various measuring distances
Only if available: controls the programmable controller PI 6000
8.5
Beginning
Before using the software, the serial interface connected to the pyrometer has to be selected under
the Computer icon. For two devices two PC interfaces must be used.
8.6
Number of devices
With a click on “number of devices” InfraWin changes to the display of 1 or 2 devices. If 2 devices
are selected, always 2 windows are displayed for settings or evaluation.
8.7
Basic settings
Under pyrometer parameters all preset values
can be displayed and modified if necessary. A
changed value is entered immediately in the
pyrometer.
The window pyrometer parameters contain all parameter
settings described in 7, Parameter descriptions / set-
tings.
The open / save button enable to store
and recall own pyrometer configurations.
“1 meas.“ shows the current measuring
temperature in the pyrometer parameters
window for approx. 1 second.
“Print” prints this pyrometer parameters window.
With close the setting modus is quit, all displayed values
are already taken over in the pyrometer.