Allied Telesis AT-PWR5 - Handbuch (Seite 18)

8
Operating the AT-PWR5
The AT-PWR5 does not require any software configuration or software
management. The status of the power supply can be determined by viewing
the LEDs on the front of the media converter. Figure 4 shows the location of
the LEDs. Table 1 lists the functions of the power supply LEDs.
Figure 4 Media Converter (Front) Power Supply LEDs
Table 1 Power Supply LEDs
LED Color Indicates
BCKP Green
Weak or flashing
The optional redundant power supply, if installed, is functioning
normally.
The optional redundant power supply, if installed, is failing or has
failed.
MAIN Green
Weak or flashing
The main power supply is functioning normally.
The main power supply is failing or has failed.
RESET
LINK TEST
NORM
TEST
Tx Rx Tx Rx Tx Rx Tx Rx Tx Rx Tx Rx
T-LNK
F-LNK Active
MCF6SC 10Base-TX/FX Media Converter
MANAGEMENT
LNK REC
STATION HUB OR
10Base-T
RS232
P O W E R
BCKP
MAIN
Ready 1 2 3 4 5 6
RS232
BCK
MAIN
POWER
Media Converter