Installation, commissioning and operation – WIKA SC15 Benutzerhandbuch

Seite 6

Advertising
background image

GB

4. Technical data / 5. Installation, commissioning, operation

1148

690 09/

009 GB/D

WIKA Operating Instructions Combistat Model SC

6

Standard switch differential
<  % of the measuring range at the reference temperature of  °C at the case
and capillary

Electrical connection
0.8 x 0.6 mm terminal block or AMP plug connection

Case
Plastic (ABS), black or steel

Type of mounting
Panel mounting with clamp
(NS 100: steel case with panel mounting flange)

Options

Panel mounting flange
Protection cap IP 1 or IP 4
Case steel with  or 4 fixed micro switches

5. Installation, commissioning and operation

When fitting and using the instruments, the following
fundamental requirements must be followed:

The display range of the safety temperature regulator should be chosen

so that the maximum temperature at the sensor does not exceed the
display range. Also, after the switchpoint has been exceeded, a
resultant reheating process has to be taken into account.

In operation the equipment should not be subjected to strong vibration

or impact loads.

Contamination and high ambient temperature fluctuations should be

avoided.

Any break in the capillary will destroy the instrument and result in it

switching off.



Advertising