Philips BlueTouch-Schmerztherapiegerät - Handbuch (Seite 41)

4 The BlueTouch Pain Relief Patch automatically switches off after the
treatment time in the selected mode has elapsed. For the treatment
times, see section ‘Treatment schedule’.
interrupting treatment
1 If you want to interrupt the treatment briefly, simply remove the Pain
Relief Patch from the skin.
, The LEDs of the BlueTouch Pain Relief Patch automatically switch
back to eye-safety mode.
Caution: Do not look directly into the light emitted by the LEDs, even
when the LEDs operate in eye-safety mode and the treatment time is
paused.
Note: After 10 minutes in eye-safety mode, the BlueTouch Pain Relief Patch
switches off.
2 To resume the treatment after a brief interruption, place the
BlueTouch Pain Relief Patch back onto the skin.
, The LEDs of the selected mode automatically switch back on at the
intensity selected and the treatment time continues to count down.
switching off
1 If you want to switch off the Pain Relief Patch before the treatment
time has elapsed, press the mode button one or more times until the
LEDs switch off.
, A sequence of two different tones indicates that the BlueTouch Pain
Relief Patch switches off.
Note: The number of times you have to press the mode button until the
BlueTouch Pain Relief Patch switches off depends on the mode you selected.
After treatment
Treatment ends automatically after the treatment time in the selected
mode has elapsed, unless you remove the BlueTouch Pain Relief Patch and
press the mode button to stop treatment earlier.
Note: A sequence of two different tones indicates that the BlueTouch Pain
Relief Patch switches off and treatment has ended.
1 Loosen the strap and remove it from your back.
2 Remove the BlueTouch Pain Relief Patch from the strap.
3 Recharge the BlueTouch Pain Relief Patch if it beeps and the charging
light flashes to indicate that the batteries are low (see section
‘Battery level signals’).
english 41