ADAM Audio F Series - Handbuch (Seite 8)

8
Please make sure that there are no obstacles in the way from the monitor to your ears. You
should be able to see the speakers completely.
3.1 Vertical set up
The F-series has been designed for a vertical set up.
The speakers must be positioned on a solid surface
or a stand. Please note that vibrating parts of nearby
objects can mask the sound.
3.2 Horizontal set up
If you choose to use your speakers in hori-
zontal position as indicated below, please
make sure that the set up is mirrored/
symmetrical, i.e. that the tweeters both
face either the outwards or inwards. This
is crucial for a precise stereo signal.
3.3 Tweeter at the height of ears
The Tweeter should be positioned approxi-
mately at the height of your ears. In case
you need to position the speaker in a sig-
nificant lower or higher position, the moni-
tor should be angled accordingly.
3.4 The Stereo Triangle
If the loudspeaker is going to be used for stereo ap-
plications, the optimum listening position should be
at the top of an imaginary equilateral triangle with the
two loudspeakers to be placed at the other two points
of this triangle. The loudspeakers should be aligned
with the listener’s position.
3. Speaker Placement
like
this:
or like
that: