EUCHNER STP-TWxxxAS1 - Handbuch (Seite 7)

Operating Instructions Safety Switches STP-TW...AS
1
0,3
v
h h
v
<72>
171
27
30
<42>
GN RD
Power Fault
20
4 4
16
0,3
<74> <80>
144
<42>
30
4
228
14
16
20
Figure 4: Dimension drawing STP-TW...AS
∅ 5.3 (2x)
for M5x35 mm
ISO 1207/ISO 4762
Mechanical
release
Locking screw
Necessary minimum travel + permissible overtravel
Approach direction Actuator S standard
Horizontal (h) 24.5 + 5
Vertical (v) 24.5 + 5
∅ 5.3 (2x)
for M5x35 mm
ISO 1207/ISO 4762
EC declaration of conformity
The manufacturer named below herewith declares that
the product fulfills the provisions of the directive(s)
listed below and that the related standards have been
applied.
EUCHNER GmbH + Co. KG
Kohlhammerstraße 16
70771 Leinfelden-Echterdingen, Germany
Directives applied:
f Machinery directive 2006/42/EC
Standards applied:
f EN 60947-5-1:2004 + Cor.:2005 + A1:2009
f EN 1088:1995+A2:2008
Leinfelden, July 2010
Dipl.-Ing. Michael Euchner
Director
Duc Binh Nguyen
Authorized representative empowered to draw up
documentation
The signed EC declaration of conformity is included
with the product.
Technical data
Parameters Value
Housing material Reinforced
thermoplastic
Deg. of prot. acc. to IEC 529 IP 67, mating connector plugged
Mechanical life
1x10 6 operating cycles
Ambient temperature -20 ... +55°C
Installation position Any
Approach speed, max. 20 m/min
Actuating force 35 N
Extraction force 30 N (not locked)
Retention force 20 N
Locking force F max 2,500 N
Locking force F
Zh
according to GS-ET-19
Weight
Approx. 0.6 kg
Switching principle SK, ÜK Positively driven, slow-action
switching contact
EMC protection requirements Acc. to EN 50295 (AS-Interface
standard) and IEC 62026
Guard solenoid
Solenoid operating voltage
DC 24 V +10%/-15% 8 W
(auxiliary power on black Power supply unit with safe isolation
AS-Interface line) (IEC 60742, PELV)
Solenoid operating current 300 mA
Duty cycle 100%
Connection M12 plug connector
Minimum travel and overtravel
Approach direction
Actuator S Actuator L for
Standard Insertion funnel
horizontal (h) + vertical (v) 24.5 + 5 28.5 + 5
AS-Interface data acc. to EA code: 7
AS-Interface specification 2.1 ID code: B
Operating voltage AS-Interface DC 22.5 ... 31.6 V
Total current consumption, max. 45 mA
Valid AS-Interface addresses
1 - 31
AS-Interface inputs Acc. to AS-Interface Safety at Work
Door monitoring contact SK D0, D1
Solenoid monitoring contact ÜK D2, D3
AS-Interface outputs
D0
Guard locking solenoid,
1 = solenoid energized
D1 Red LED, 1 = LED on
D2 Green LED, 1 = LED on
AS-Interface LED Power Green, AS-Interface voltage present
AS-Interface LED Fault Red, offline phase or address 0
Reliability values according to EN ISO 13849-1
B
10d
4.5 x 10 6
(F
Zh
=
F
max ) = 2000 N
1,3
Do not use these
mounting holes!