EUCHNER STP-TWxxxAS1 - Handbuch (Seite 8)

Operating Instructions Safety Switches STP-TW...AS
1
EUCHNER GmbH + Co. KG Kohlhammerstraße 16 D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 Fax +49/711/75 33 16 www.euchner.de [email protected]
Figure 5: Min. door radii
Actuator type Door radius min. [mm]
Actuator S-G... 300
Actuator S-W... 300
HINGED ACTUATOR S-OU... 200
HINGED ACTUATOR S-LR... 200
Hinged actuator S-OU-LN
for insertion funnel
Hinged actuator S-LR-LN
for insertion funnel
16
30
R >
200
35,5
4
28,5 +5
20
R>200
Hinged actuator S-OU-SN
Hinged actuator S-LR-SN
24,5 +5
12
26
35,5
R >
20
200
R>200
Status table
Programming State D0, D1 D2, D3 Monitor diagnosis
Safety guard closed, guard locking active Code sequence Green
Guard locking open Half-seq. 00 Yellow flashing
2-channel
Invalid state
00 Half-seq.
Red flashing
conditionally
(safety guard open, guard locking active) (monitoring of the invalid state)
dependent
Safety guard open 00 00 Red
Address 0 or communication disrupted – Gray
Safety guard closed, guard locking active Code sequence Green
Guard locking open Half-seq. 00 Red
2-channel Invalid state
00 Half-seq.
Red
independent (safety guard open, guard locking active) (monitoring of the invalid state)
Safety guard open 00 00 Red
Address 0 or communication disrupted – Gray
Green if safety guard was previously open
Safety guard closed, guard locking active Code sequence or yellow flashing after startup,
if only guard locking was open.
2-channel
Yellow flashing,
dependent
Guard locking open Half-seq. 00 if guard locking was previously closed.
Synchronization time
Red if safety guard was previously open.
infinite
∞ ∞ ∞ ∞ ∞
Invalid state
Yellow flashing,
(safety guard open, guard locking active)
00 Half-seq. if safety guard was previously closed.
Red if safety guard was previously open.
Safety guard open 00 00 Red
Address 0 or communication disrupted – Gray