JUMO 707040 dTRANS T04 - 4-Wire Transmitter Operating Manual - Handbuch (Seite 60)

24
3 PC setup program
3.5.5 Setup data info
The Edit
Î Setup data info function consists of the two parts: File
info header and File info text, and serves to describe the setup file
on the PC side. The information is not stored in the transmitter.
3.5.6 Configuration data
The Edit
Î Configuration data function can be used if data have
been read out from a connected transmitter. The device name and
the version number of the software contained in the device are
displayed.
3.5.7 Data transfer to device
Using Data transfer
Î Data transfer to device (or the in the
toolbar), the present setting is transferred to the transmitter by the
PC setup program.
3.5.8 Data transfer from device
Using Data transfer
Î Data transfer from device (or the icon in
the toolbar), the present setting of a transmitter is read out and
displayed in the PC setup program. The Setup data info (File info
header and File info text) information will not be lost by the readout,
i.e. will not be overwritten.
3.5.9 Calibrating and testing
Extras
Î Calibrating and testing (or the icon in the toolbar) is
only available for the manufacturer, for servicing purposes.