Lenze HMI Designer Getting Started - Handbuch (Seite 31)

HMI Designer
L
PN EDBHMI-DEEN DE/EN 4.0
O póëíÉã кЙимбкЙгЙенл
The following minimum requirements on hardware and software must be met to use the HMI Designer
program:
• Microsoft Windows 95 / 98 / ME / 2000 / NT 4.0 (Service Pack 3 or higher) / XP
• IBM-compatible PC (Pentium 166 MHz or higher)
• 32 MB RAM
• 100 MB free harddisk capacity
• VGA graphics card
• CD-ROM drive
• Free serial interface for communication with the keypad
We recommend to use a mouse.
OKN `зееЙЕнбзе зС вЙуй~З ~еЗ m`
For communication with the keypad you need the download cable EPZ-H110, which is to be connected
to a free serial port of your PC.
For the keypads EPM-H310, EPM-H312, EPM-H315, EPM-H502 and EPM-H507 you also need the
programming adapter EPZ-H111.
PC Keypad
Port Transmission
medium
Required
components
Type Port Required
components
Serial
port (COM port)
RS232 Download cable
EPZ-H110
EPM-H310
EPM-H312
EPM-H315
EPM-H502
EPM-H507 ASP8 (RS232) Programming
adapter EPZ-H111
EPM-H410
EPM-H505
EPM-H510
EPM-H515
EPM-H520
EPM-H521 MSP (RS232) -
kçíÉ
Handling and installation of the required components are described in the Mounting Instructions
delivered with every keypad.