Lenze HMI Designer Getting Started - Handbuch (Seite 32)

HMI Designer
L
PO EDBHMI-DEEN DE/EN 4.0
OKO `зееЙЕнбзе зС вЙуй~З ~еЗ ЕзенкзддЙк
The keypads communicate with the controller via system bus (CAN). Controllers can be, e.g. a
Lenze 8200 frequency inverter, 8200 vector, 9300 Servo inverter, 9300 Servo PLC or Drive PLC.
• For the installation of the system bus (CAN), please see the Mounting Instructions delivered with
every keypad and every controller.
kçíÉ
• These Instructions contain the introduction into the HMI Designer using the example of project
H310_93xx.vts, which is saved on the CD-ROM “HMI Designer”. This sample project is ready
for operation for the keypad EPM-H310 and suitable to control a Lenze 9300 Servo inverter or
a 9300 Servo PLC.
• For sample projects of other keypads, please refer to the HMI Designer directory
HMI Designer  Samples.