Weidmuller PTX800A - Configurable counter and totalizer - Handbuch (Seite 36)

6
Alarmchanneltwosettings
As above
As channel one (except uses A2_nor_E, A2=_rate,..., delay_2=)
Generalalarmsettings
Setpoint
security
SECure_y
SECure_n
Setpoints fixed at setup
Can change setpoints
Toggle Accept
Alarm reset
sequence reS_Auto
rES_Oper
Automatic reset
Manual reset
Toggle Accept
Analogueoutputsettings(notshownunlessoutputsarefitted)
Output type
Out=_Cur
Out=volt
Current (mA) output
Voltage (V) output
Toggle Accept
Output type
Out=_Cur
Out=volt
Current (mA) output
Voltage (V) output
Toggle Accept
Output range
Out_LO=
4.00
Introduces output low value
Value, e.g., 4.00 mA -
Dec
-
Inc
Next
Accept
Out_HI=
20.00
Introduces output high value
Value, e.g., 20.00 mA -
Dec
-
Inc
Next
Accept
Output Action
Out_d r
Out_rev
Direct (proportional) output
Reversed (inverted) output
Toggle Accept
Calibrationoptions
Calibrate
Output? CalOut_n
CalOut_y
Skip output calibration
Calibrate outputs
Toggle Accept
Display
Intensity Intens_=
234567.89
Introduces the display intensity
Demo display for adjustment -
Dec
-
Inc
Next
Accept
Save values SAVE
Instrument is saving the changes to the setup and returning to
normal operation
SetupSequence(continued)